BPFMT - ABLEBOND 163-4 & 163-4 LVFF PART C
- MSDS: BPFMT
- Manufacturer: ABLESTIK LABS
- Product Name: ABLEBOND 163-4 & 163-4 LVFF PART C
- National Stock Number: 8040-01-316-1900
Product Identification
Product ID:ABLEBOND 163-4 & 163-4 LVFF PART C
MSDS Date:12/05/1988
FSC:8040
NIIN:01-316-1900
Kit Part:Y
MSDS Number: BPFMT
Responsible Party
RANCHO DOMINQUEZ, CA 90021
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 213-764-4600
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
COPPER
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 100%
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: INHALATION OF HIGH
CONCENTRATIONS OF DUST, MAY CAUSE INTENSE SNEEZING, NAUSEA,
WEAKNESS AND FEVER. SKIN: NOT APPLICABLE. EYES: CAN CAUSE
IRRITATION. MAY CAUSE DAMAGE TO EYES. ABSORBED THRU SKIN :
INFORMATION NOT AVAILABLE. INGEST: NOT AVAILABLE. CHRONIC: CAN
CAUSE HEMOLYSIS OF RED BLOOD CELLS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: DEPOSITION OF HEMOFUSION IN LIVER AND
POSSIBLE INJURY TO LUNG CELLS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. SEEK MEDICAL
ATTENTION. SKIN: WASH IMMED WITH SOAP AND WATER. IF IRRITATION
PERSISTS, SEEK MED ATTN. INHAL: REMOVE TO FRESH AIR IMMEDIATELY.
INGEST: SEEK MED ATTN IMMED AND SHOW INSERT CARD.
Fire Fighting
Extinguishing Media:GRAPHITE, DOLOMITE OR SODIUM CHLORIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER.
Unusual Fire/Explosion Hazard:COPPER POWDER BELOW 50 MICRON SIZE RANGE
IS CLASSIFIED AS WEAKLY EXPLO MATL. WHEN PRESENT AS DUST CLOUD WILL
NOT EXPLODE READILY IN AIR. NOT EASILY (SUPP DATA)
Accidental Release
Spill Release Procedures:COLLECT FOR DISPOSAL AVOIDING DUST CLOUDS. USE
BROOM, OR VACUUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, AND
FLAME. NO SMOKING. STORE IN COOL DRY AREA.
Other Precautions:AVOID CONTACT WITH SKIN, EYES AND CLOTHING. AVOID
INHALATION OF VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED MASK FOR TOXIC DUST TO
PROTECT AGAINST DUSTS.
Ventilation:VENTILATION EQUIPMENT TO REMOVE DUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:AVOID CREATING DUST CLOUDS. GOOD HOUSEKEEPING
IS REQUIRED.
Supplemental Safety and Health
EXPLO HAZ: IGNITED BY SPARKS.
Chemical Properties
Vapor Pres:1
Spec Gravity:3.6
Evaporation Rate & Reference:0.001(BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:REDDISH BROWN POWDER; ODORLESS.
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:HIGH ACIDITY, OXIDIZING AGENTS.
Hazardous Decomposition Products:NITROGEN OXIDE IF REACTED WITH NITRIC
ACID.
Disposal
Waste Disposal Methods:DUMP INTO LANDFILL OR RECLAIM FOR COPPER SCRAP
CONTENT. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.